| Grade |
Stainless Steel 420 (UNS S42000) |
| Flat bar size |
1/2” to 10” in thickness range of 2mm to 150mm |
| Square bar size |
18mm – 47mm (11/16″ to 1-3/4″) |
| Round bar size |
Outside Diameter in the range of 4mm to 500mm |
| Hex Bar size |
18mm – 57mm (11/16″ to 2-3/4″) |
| Bright Bar |
Outside Diameter in the range of 4mm to 100mm |
| Channel Bar |
80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar |
32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size |
1/2″ to 495mm Diameter |
| Angle bar size |
3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular bar Size |
33 x 30mm to 295 x 1066mm |
| Finish |
Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance |
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface |
Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Condition |
Hardened & tempered, annealed |
| Technique |
420 Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Processing |
Bar cutting to 650mm |
| Section |
3.0 to 12.0mm thickness |
| Form |
Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 420 Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 |
